background image

Version: 20220420 

 

 3 

Safety and regulatory information 

Definition of symbols 

Hazard statements 

 

Danger:

 

Indicates a hazardous situation which, if not avoided, 

will

 result in serious injury or death.

 

 

Warning:

 

Indicates a hazardous situation which, if not avoided, 

could

 result in serious injury or death.

 

 

Caution:

 

Indicates a hazardous situation which, if not avoided, 

might

 result in moderate or minor injury.

 

 

Notice:

 

Indicates a situation which, if not avoided, might result in property damage or in an 
undesirable result or state.

 

 
Others 

 

Information:

 

Indicates a shortcut or any other useful indication.

 

 

Attention:

 

Indicates an element which requires extra attention, not necessarily a hazard

 

 

Safety information 

 

Attention:

  

Please read this document carefully before installing the FireCatcher Camera. Configuration and usage are described 
in the FireCatcher Camera User Manual. 

This document must be kept for future reference. 

Before installation, check for eventual exterior damages. If the device presents exterior damages, do not install it and 
contact your supplier. 

 

Notice: 

Do not remove any label from the device. 

Avoid exposing the FireCatcher Camera to shocks or heavy pressure. 

Do not install the product on unstable poles, brackets, surfaces or walls. 

Use only applicable tools when installing the FireCatcher Camera. Using excessive force with power tools could cause 
damage to the product. 

Equipment modifications 

This equipment must be installed and used in strict accordance with the instructions given in the user documentation. 
This equipment contains no user-serviceable components. Unauthorized equipment changes or modifications will 
invalidate all applicable regulatory certifications and approvals. 
Do not attempt to repair the product yourself. Contact your supplier for service matters. 
 

Disposal and recycling 

When this product has reached the end of its useful life, dispose of it according to local laws and regulations. For 
information  about  your  nearest  designated  collection  point,  contact  your  local  authority  responsible  for  waste 
disposal. In accordance with local legislation, penalties may be applicable for incorrect disposal of this waste. 

Summary of Contents for 8000004




























Reviews: