Version: 20220420
15
2 Route cable
Guide the cables through the hole in the bottom of the
bracket, through the bracket.
Leave at least 30 cm of wire for connection.
Proceed with camera body mounting.
BRACKET MOUNTING INSTRUCTIONS WITH CONDUIT BOX
Another way to feed the cables to the FireCatcher Camera without going through the mounting surface can be
accomplished by using the Axis TQ1601-E conduit back box. The cables can be guided sideways in any direction
through this box as illustrated below. The FireCatcher Camera is then further mounted on top of the conduit back box
as described in the case with wall-feed cabling.
The conduit box can be purchased from your supplier as "Axis TQ1601-E conduit back box". See
https://www.axis.com/products/axis-tq1601-e-conduit-back-box
for more information on this product.
1 Mount the conduit box
Mount the conduit back box to the wall as illustrated.
Make sure the box is mounted horizontally by using a
spirit level.
2 Route cabling and attach the mounting bracket
Guide the cables through the mounting bracket and fix
the bracket on top of the conduit box, using the
included Torx screws.
