AR 10046836, Operating And Service Manual

Page: 40 / 62

Model 500W1000C
20 Rev A
Example: To set the RF Gain to minimum, send the following command:
LEVEL:GAIN0<LF>
To set the RF Gain to 50%, send the following command:
LEVEL:GAIN50<LF>
To set the ALC Response Time to max, send the following command:
LEVEL:RESP7<LF>
2.6.6.6 Identity
Query to identify the amplifier.
Syntax: *IDN?
Parameters: None
Query only (always requires a ? character)
Response Format: f,m,n,<LF>
Where:
f = manufacturer
m = model designation
n = firmware revision
Example: To get the identity of the amplifier, send the following command:
*IDN?<LF>
Response: AR-RF/MICROWAVE-INST, MODEL ,1.0<LF>
2.6.6.7 IO Board Firmware Revision
Query to get the firmware revision of the I/O Board.
Syntax: *IOB?
Parameters: None
Query only (always requires a ? character)
Response Format: INTERFACE_BOARD_SW_REVx<LF>
Where:
x
= firmware revision
Example: To get the firmware rev. of the I/O Board, send the following command:
*IOB?<LF>
Response:
INTERFACE_BOARD_SW_REV3.00<LF>