AquaVac TigerShark, Owner'S Manual

Page: 6 / 20

GENERAL INFORMATION
Congratulations on your purchase of an TigerShark microprocessor controlled, fully automatic
pool cleaner. The TigerShark represents the highest standard in design, performance, and
quality. This manual contains important information regarding the operation and maintenance
of your TigerShark.
Please read and follow all
instructions carefully before
Putting your tigershark into use.
Deterioration, discoloration or brittleness of any pool finish can be caused over time separate-
ly by, or in combination with, age, incorrect pool water chemistry, improper installation, and
other factors. Customer hereby disclaims any and all claims, and releases Manufacturer from
any and all claims for damages to any pool plaster or vinyl liner in Customer's pool by reason
of the use and/or operation of the Cleaner. Under no circumstances shall the Manufacturer
be liable for any loss or damage, whether direct, consequential or incidental, arising out of
the use or inability to use the cleaner in Customer's pool.
FEATURES
• The TigerShark independently scrubs, vacuums, and filters your pool.
• No installation, no attachments. Just drop it in and turn it on. It is completely automatic.
• Filter cleaning is much easier with the new patented cartridge type filter element.
• Adaptive Seek Control Logic (ASCL®) Microprocessor control optimizes cleaning routine
for each individual pool size and shape.
• Electronic Self-Diagnostics and Overload Protection.
• Simple Direct Drive design w/non-corrosive bearings for high reliability.
GENERAL OPERATING INSTRUCTIONS
Take a moment to get familiar with the TigerShark using the figure on page 10. Throughout
this manual reference to this figure is made when referring to different components of the
TigerShark.
1. Select the nearest GFCI (Ground Fault Circuit Interrupter) protected 110-120 volt AC
outlet (220-240 volt for 240 volt models).
2. Place the power supply (#1) so that the TigerShark can reach all the walls of the swim-
ming pool and the power supply is at a minimum distance of 11.5 feet from the pool edge
(page 10 Fig. a). The length of the standard TigerShark cable is 55 feet. (TigerShark2
®
cable is 100 feet).
3. Connect the floating cable (#2) to the power supply. Use only the original TigerShark
Power Supply manufactured by Hayward Pool Products.
4. The TigerShark has an adjustable handle (#3). The handle must be locked in a diagonal
position in order to ensure optimal cleaning results. The handle has two diagonal posi-
tions. Reverse handle position after each use. (page 10, Fig. b) to minimize cord twisting.
6