AquaVac TigerShark, Owner'S Manual

Page: 9 / 20

HANd HELd REMOTE CONTROL
TROUbLESHOOTING THE REMOTE CONTROL FUNCTION
If the TigerShark Plus does not turn when the remote control is activated:
Be sure to aim hand held toward power supply, not the unit.
Be sure there are no obstructions between the remote control and the
power supply.
The distance between the remote control and power supply should not
exceed 75 feet. Moving closer will ensure better reception.
The batteries in the remote control may need to be replaced. (Requires one
CR2032 lithium battery.)
The overload protection breaker located on the front of the power supply may
be tripped. To reset depress the small black button located above the
flotation cord connection on the power supply.
The Turning Foot may be lodged with debris. Turn cleaner off and remove
from the pool. Manually work foot in and out to clear any debris, foot should
slide easily.
For remote control units with foam rollers, before operating the transmitter,
cleaner must be in water for at least 15 minutes to avoid cleaner floating.
9