MINIPACK
X:/Aquatech-Pressmain Instruction manuals/current/MINIPACK
10
1.3.3.3 Overflow
i.
An overflow warning pipe is fitted to the side of the panel. This can be extended as required using 22mm
OD pipe which will fit inside the supplied overflow.
Pressure
Transducer
Level Sensor
Mains Water Break Tank
15mm Float Valve
15mm Incoming
Mains Supply
Microprocessor Controller
System connection
on suction side of
Circulating Pumps
Sytem filling device
e.g. quick fill loop,
(check local water
regulations)
Drain Cock
Isolating Valve
Pressurisation
pumps
IMPORTANT
Make connection to the
UNDERSIDE of system
pipework
"AquaTank"
diaphragm
expansion
vessel
CONTROLLER
MiniPack Pressurisation Unit Pipework supplied and fitted by installer
Isolating Valve
Isolating
Valve
System
connection
Fig 1.2: Typical Pipework Layout.
