background image

Starting the count: 

When the questions for all channels are answered the display will show: 
 

   Press 

and the counter starts counting, see next section. 

   Press 

Y

 if you wish the system to give an alarm (siren) when a given number of  

fish have passed. The display will show: 

 
 
                                                        Enter the number of fish for the displayed channel and press 
                                                        

Enter

. The counter is asking for the alarm number for each 

         channel. Press 

Enter 

only if no alarm is intended for the given 

         channel. After all channels are entered the counter will start  
         counting. 

 
The counter displays the sum of fishes passed through the shown channels. The message 

CAL

 is 

shown after the number whenever calibration is performed for one or more channels shown. 
 
An example, if the display reads:      

     

it means that 162 groups of fish  have 

passed C1 and C3 together. Here are one or both channels in calibration mode. A press on indicator 
C3 will hide channel 3 and the result in channel 1 is viewed e.g.:   
 
This means that calibration is at least in progress for channel 1.   
 
If the same indicator (C3) is pressed again, the display will return to show the sum of units C1 and C3: 
 
 
Now a press on indicator C1 (hide C1) may give this result: 
 
Please note that the text 

Cal

 does not follow the number viewed here. This means that there is no 

calibration on channel 3. This example shows that the average size on this channel is based on the 
former counting operation. No average weight was given for this particular channel. 
 
 
When the calibration is finished (at least 125 fish) the text Cal will automatically disappear and 
AquaScan will show the correct number of fish passed during the calibration. 
 
Pressing the belonging channel-button will stop an alarm (Alarm number, Error message) 
 
 

Counting pause: 

You can temporary stop (pause) the counting with the stop button (

0/Stop

 key). The screen will show:      

 

 Press 

Y

 to continue counting or  

 Press 

N

 to restart the system and the screen will read:  

 

 

Type in a new average weight or press only 

Enter

 to resume counting. 

 

ALARM Y/N 

AlarmNbr C

x

:

 

C13: 162 Cal

 

 C1: 70 Cal  

C13: 162 Cal

 

C3: 92 

CONTINUE Y/N

 

WEIGHT(g) C

x

:  

 

Page 5 of 20 

Summary of Contents for CSE Series





















Reviews: