26
2
System Configuration
2
System Configuration
Inhibitor Read Screen
This screen displays the inhibitor status.
RL (relay):
OFF/ON
PUMPCAP lts/hr: Pump output set
DOSE ml/hr:
Dose rate set
MODE:
BLEED/CON/FLOW/WM/OFF
For descriptions and information on setting these items, refer to
the section Set Inhibitor Screen.
Water Meter Inhibitor Read Screen
This screen displays the Water Meter inhibitor status on systems
with a Water Meter configured.
RL (relay):
OFF/ON
PUMP CAP lts/hr: Setting for the pump output
PPM:
Parts per million dose
Pulses/L:
Impulses per litre from the Water Meter
For descriptions and information on setting these items, refer to the
section Set Water Meter Inhibitor Screen.
Water Usage Meter (WUM) Read Screen
This screen displays the total water usage readings for Makeup,
Bleed & their Difference. These values can be reset in the Calibration
menu.
The corresponding screens display the Makeup, Bleed and
BackWash water-meter readings. It also shows the usage as a
Month to Date (MTD) & Year to Date (YTD) figure.
MTD figure will reset automatically on the 1st day of the new
month.
YTD figure will reset automatically on 1st Jan.
The measurements in litres of each water meter will be data logged
for the selected datalog period.
Note: Changing of log intervals within the time period will result in
inaccurate readings in AquaGuard 2. Log intervals is recommended
at 30min which allows for 1 month worth of data.
Dispersant Read Screen
This screen displays the dispersant status.
RL (relay):
OFF/ON PUMP
CAP lts/hr:
Setting for the pump output
DOSE lts/hr:
Setting for the dose rate
MODE:
The mode set
For descriptions and information on setting these items, refer to the
section Set Dispersant Screen.
DISPERSANT RL=OFF
PUMP CAP lt/hr=1.00
DOSE lt/hr=0.05
INHIB=OFF