4
Introduction
The Midas product range is available as either exposed shower valve systems or exposed bath/shower mixer systems
complete with adjustable height heads. All shower heads feature variable spray patterns. Midas thermostatic valves
provide close temperature stability and fail safe protection on appropriate high and low pressure systems.
The Midas 100 shower valve is suitable for use with gravity, high pressure and combination boiler systems. The
Midas 100 bath/shower mixer is suitable for use with high pressure and combination boiler systems. Please refer to
the product specification section below.
The Midas 200/300 features a specific low pressure exposed valve for use on gravity systems and an exposed valve
and bath/shower mixer suitable for use on high pressure and combination boiler systems. Please refer to the product
specification section below.
In the event of any product problems, please contact the Aqualisa customer helpline on 01959 560010 for
assistance.
Safety information
This product must be installed by a competent person in accordance with all relevant current Water Supply
Regulations.
The Midas range is designed for domestic use only.
Product specification
Midas 100 shower valve, product is suitable for gravity stored, gravity boosted, balanced high pressure and
combination boiler systems. Pressure range 0.1 – 10 bar max (static).
Midas 100 bath/shower mixer, product is suitable for balanced high pressure and combination boiler systems.
Pressure range 1.0 – 10 bar max (static).
Midas 200/300 low pressure shower valve, product is suitable for gravity stored and boosted gravity systems only.
Pressure range 0.1 – 1.0 bar max (static).
Midas 200/300 high pressure shower valve, and Midas 200/300 bath/shower mixer, product is suitable for balanced
high pressure and combination boiler systems. Pressure range 1.0* – 10.0 bar max (static).
* The combination boiler MUST have a minimum rating of 24kW (80,000 Btu) and be of the type fitted with a fully
modulating gas valve.
If in any doubt, please contact the appliance manufacturer before installation commences.
Connections
The Midas product range is designed for conventional supplies with HOT on the Left and COLD on the Right as
viewed from the front.
Supply lines must be flushed clear of any debris before installation of the unit. Any debris accumulation in the
shower valve and head may result in damage and poor performance.
Important information
