21
8
If required, optional outlet flow regulators can be purchased from the Aqualisa customer helpline on 01959 560010.
Fit the relevant flow regulator into the brass housing ensuring the O’ring faces the incoming flow.
9
Connect the hose to the bottom of the valve outlet ensuring the hose washer is correctly fitted to allow the water to
discharge safely to waste and run the shower for a few seconds to clear any debris in the outlet assembly.
10
Turn off the shower and pass the hose through the hose restraint.
11
Ensuring the hose is in the correct position, offer the hose onto the handset. Push the handset
onto the hose to lock the anti kink swivel connector and secure the handset to the hose. Once
tightened carefully pull the handset away from the hose to release the integral anti kink swivel
connection. Place the handset into the handset holder.
!
6lpm outlet flow regulators are not suitable for products fitted to combination boiler systems.
The tension of the handset station of the handset holder is factory set. However, it may be
necessary, especially for showers fitted to high pressure systems, to tighten the tension as
required. Tighten the screw inside the handset station taking care not to over-tighten.
!
