background image

ROCKIT JR

REPAIR

15

aquaglide.com | © 2017 Aquaglide

INSTRUCTIONS

Leaks must be patched with the item completely deflated and patches 

must be allowed to cure for 12 hours minimum. Curing for 24 hours is 

highly recommended. In most cases you will need enough room to inflate 

the product for inspection.

Following these instructions and using patch material similar to the original 

material is the best way to ensure the strength and durability of your 
Aquaglide product.

WORK SPACE AND TOOLS

1. Take care to position yourself in a clean, dry area with good ventilation. 

For proper curing of adhesives temperature should remain above 50 
degrees F and relative humidity below 60%.

2. Repair Kit Contents: PVC patch material, MEK cleaner, 220 grit 

sandpaper, PVC glue, shop towel, china marker, instructions.

3. Additional items that may be needed: Air pump, sharp scissors and / or 

razor knife, dish washing liquid, water, small bowl or spray bottle, rubbing 
alcohol, clamps, wood for clamp use (see images), Tear-Aid™ Patch 
material, 

LOCATE LEAK(S)

1. If there is a problem with air leaks, you will need to locate the leak(s) first.
2. Inflate your Aquaglide product fully. Some small leaks can close 

themselves at lower air pressures, so it is best to maintain full pressure 

by re-inflating periodically while checking for leaks.

3. Use a soapy water solution (50% / 50% dish soap & water) and a 

cloth to check for leaks. Work slowly around the product spraying or 
swabbing-on soapy water solution. Look for growing bubbles, which 
indicate a leak.

4. Once a leak is confirmed, dry the area well. Mark leak with china marker 

and prepare to patch. 

Summary of Contents for Rockit JR





















Reviews: