www.aquaglide.com
9
Inflated boards can be transported on roof racks with adequate straps. Nose forward and bottom facing
upward is best. Monitor sun exposure – be careful not to exceed working pressure.
A well-packed iSUP can typically go on most airlines without oversize baggage charges. A 3-piece Aquaglide
paddle will ensure paddle fits in the bag too. This board includes an extremely durable travel bag, which is
recommended for airline travel with any Aquaglide iSUP.
CARE & MAINTENANCE
Proper cleaning, maintenance, and storage is essential to help prolong the life of your product. Do not
use petroleum-based cleaners on this product. Improper use of a pressure washer can damage or
destroy the product.
Basic Cleaning:
Always rinse product thoroughly with fresh water after use in salt water or any water
containing large amount of sediment or algae. This helps prevent buildup of dirt particles which can
accelerate wear. For deeper cleaning, use soft bristly brush or sponge with mild soap and fresh water.
Difficult Cleaning:
For heavy stains, marine growth, algae, mold, dirt and oils use a non-caustic
cleaning product like Simple Green or citrus-based cleaner after checking to confirm compatibility. Also,
check with your distributor, or on our website, Aquaglide.com for commercial-grade cleaning solutions.
UV Protectant:
This product is made with UV inhibitors and UV-resistant materials. However, long-term
exposure to sunlight will reduce product life and will cause fading and other product damage. Never
leave board in the sun with colored side up. Regularly apply a UV protectant specifically designed for PVC
to help ensure the life of your product. Find more information on professional-grade UV protectants from
your distributor, or on our website, Aquaglide.com.
Replacement parts:
Items like valves, fins, finboxes and other accessories can occasionally wear out
and need replacement to maintain the full function of your product. Check with your distributor, or on our
website, Aquaglide.com for available parts and replacement instructions.
STORAGE
Clean, Protect, Dry:
Clean board and consider applying UV protectant before long term storage.
Confirm board is dry before storing.
Deflate & Fold:
Remove fin(s) and large accessories. Deflate board completely: Consider using pump
in ‘deflate’ mode to remove air. Leave valve open to vent trapped air during folding. Roll and/or flat-fold
deflated product in similar manner to original packaging. If uncertain, roll from front to back - toward the
valve. Place in original storage bag and use compression straps to secure.
Storage:
Store the product out of direct sunlight and protect from environment in a clean, dry location
such as a sealed closet, crate or container to prevent against rodent damage. Never store in a damp
location or at temperatures below 40 F (4 C).
