7
Wait until the current time is displayed (the feeding is stored) or continue to set the next feeding.
Press
UP
to set the next feeding: the display shows
02oF
02 n_ F
Press
SET
and set the second feeding time and food quantity as previously described
Press
SET
to confirm the second feeding
02 n_ �
Wait until the current time is displayed (the feeding is stored) or continue to set the next feeding. You can set up to 24
automatic feedings.
Reset
Press simultaneously
DOWN
and
UP
during 3 seconds to disable all set feedings.
On the display
--:--
will appear briefly and the current time will be displayed.
The Fish feeder is back in default settings
01oN
(one feeding at 10:00 h), next automatic feedings are off (
02oF
,
previously set feeding times and quantities remain stored).
NOTICE! The settings will be saved (temporarily) if there is a power failure/interruption. In the event of a prolonged
power cut, the clock will no longer indicate the current time, therefore reset the time and feeding schedule.
Quantity of food
You can set the amount of the fish food in 10 steps. The quantity per step depends, among other things, on the specific
weight of the food used and pellet size. The indicated amounts of food in the table below are average and based on the
use of Hikari Staple. (We accept no liability for any differences).
± 330 g
± 300 g
± 270 g
± 230 g
± 200 g
± 170 g
± 135 g
± 100 g
± 65 g
± 30 g
10
09
08
07
06
05
04
02
03
01
± 360 g
± 320 g
± 280 g
± 240 g
± 200 g
± 160 g
± 120 g
± 90 g
± 60 g
± 30 g
10
09
08
07
06
05
04
02
03
01
± 275 g
± 250 g
± 220 g
± 195 g
± 165 g
± 140 g
± 110 g
± 85 g
± 60 g
± 30 g
10
09
08
07
06
05
04
02
03
01
Large
Medium**
Small*
* When using small pellets, both reducers (insert ring and insert disc) must be placed (see page 5 and Fig. H).
** When using medium pellets, only the insert ring must be placed (see page 5 and Fig. G).
