6
Maintenance
• Disconnect the cable between the feeder and the controller.
• Clean the inside of the food container regularly with a brush and a dry cloth. Remove any caked food remains,
these can block the rotor, which can lead to damage and/or malfunction of the Fish Feeder.
Programming
With the Fish Feeder controller you can easily set between 1 and 24 automatic feedings per
day.
The quantity of food can be set (in steps), so you can vary the amount per feeding.
By pressing the 'Manual' button the Fish Feeder gives a small amount of food.
You turn the Fish Feeder on by plugging the plug into the socket.
Set the current time (clock)
Press
SET
during 3 seconds
--:--
Press (short)
SET
: the hours will flash
00:
00
Press
UP
or
DOWN
to set the hours
12:
00
Press (short)
SET
: the minutes will flash
12
:00
Press
UP
or
DOWN
to set the minutes
12:25
Press
SET
to confirm the set time and wait for 8 seconds
--:--
The current time (clock) is set.
12:25
Setting the automatic feedings
Press
SET
during 3 seconds
--:--
Press
UP
: the display shows
01oN
01 n_ �
(the Fish Feeder is set to one feeding at 10 am by default)
Press (short)
SET
to set the first feeding time: the hours will flash
10:
00
Press
UP
or
DOWN
to set the hours
08:
00
Press (short)
SET
: the minutes will flash
08
:00
Press
UP
or
DOWN
to set the minutes
08
:15
Press
SET
to set the food quantity in steps from 01 to 10
:01
(01 is the setting for the smallest amount of food, 10 for the largest quantity)
Press
UP
for the next step (02, 03, 04, ....)
:02
Press
SET
to confirm the first feeding
01 n_ �
00:00
SET
UP
DOWN
manual
