10 – Charging mode
1. Place the device on a dry, flat surface.
2. Open the rubber flap over the charging socket.
3. Plug the USB cable into the charging plug and
the other end into the production unit. Then plug
the charger into a 220 V plug.
4. During charging the battery icon will light up to
indicate how much has been charged. The USB
symbol will display the charging operation.
5. Before first use the battery has to be fully charged.
Charging time is 2 - 4 hours.
6. Once the battery icon shows 4 bars, remove the
cable and close the rubber flap above the
charging socket.
