Aquacal SunPower SP05, Installation Manual

Page: 104 / 108

Page - 100
"Pool / Spa" Button Doesn't Show Correct Option
ISSUE
When pressing the "Pool / Spa" button, the appropriate body of water is not displayed as an option.
Example - "SPA" not displaying on a site with a pool with spill over spa.
RESOLUTION
The heat pump was configured with an incorrect preset.
A qualified technician should evaluate the site equipment connected to the heat pump and then select
an appropriate installation wizard preset. See "
Site Configuration Presets (Optional) " on page 35.
Schedule Not Working
ISSUE
A device isn't operating as scheduled.
RESOLUTION
l
Confirm the group has an appropriate schedule program. See " Edit a Schedule " on page 51.
l
Confirm the schedule mode is set to "AUTO" and the scheduled program mode is set to "ON". See
"
Schedule and Program Modes " on page 53.
l
Confirm the time is set correctly in the system. See equipment manual for information on changing date
and time on heat pump.
4 - Schematics
Some schematics have been provided in the appendix of this manual.
PLEASE NOTE:
l
Specifications are subject to change without notice.
l Schematics are available by calling AquaCal ® Customer Support. See " Contacting
AquaCal AutoPilot, Inc. " on page 1.
l
Please have the complete model and serial number available.
Schematic Document Numbers Chart
Phase Equipment Model Numbers Schematic #
Single
WS03, WS05 LTM0943
Three
WS03, WS05 LTM0946
Three
WS10 LTM0951
Single
SP05 LTM0943
Three
SP05 LTM0946
4
-
S
che
m
at
ic
s