![Aquablu One Manual Download Page 5](http://html.mh-extra.com/html/aquablu/one/one_manual_2959378005.webp)
Innovative purification solutions
www.aquablu.com
4
MAINTENANCE
The operational safety and efficiency of the purification system is largely dependent on the
observance of the indications provided by the system and the instructions in this manual. Pay in
particular attention to the following points:
•
Only operate the purification system within the operational limits.
•
Take corrective and/or maintenance action immediately when prompted or
required.
•
Only use original Aquablu replacements and spare parts.
•
The instructions in this manual are not a substitute for, but a supplement to the
applicable local health and safety regulations.
What is in the box?
GENERAL
The Aquablu One purification system consists of four main components.
1)
The pre-filtration unit
2)
The purification unit
3)
Power adapter for the purification unit
4) Mineral cartridge (optional)
5)
The water faucet
The box also contains the fitting, connection and mounting materials required to complete a
standard under sink installation. This includes the documentation needed to install, maintain
and use the system. See the packing list for a full listing off all materials supplied and check for
completeness before starting the installation.
1. PRE-FILTRATION UNIT
The pre-filtration unit is selected to be compatible with the feed water available on site. Physical
appearance and installation are the same. The filtration unit consists of two separate filters,
attached to a communal connection block. All parts are made from engineering plastics suitable
for drinking water systems. See figure 1a for appearance of the filtration unit.
Fig. 1a: Pre-Filtration Unit
Fig. 1b: Pre-filtration elements
The standard inserts of the pre-filtration unit are one activated carbon cartridge and one string
wound filter which prevent any particles larger than 5 micron and chlorine to harm the membrane.
See figure 1b for their identification. The filters can be easily removed for replacement purposes.
The pre-filter is installed between water supply and the purification unit. The unit has a dedicated
direction of flow, which cannot be reversed.