Innovative purification solutions
www.aquablu.com
25
Using and supervising the system
Using the Aquablu system is convenient and easy as it only requires the use of the water faucet,
and enjoying the safety and good taste provided by the Aquablu One unit.
The system is designed in such a way that routine checks and regeneration of the membrane is
taken care of by the system itself.
During normal operation, the blue light on the water faucet will be illuminated, and the indications
in the App will state “SAFE” and the indications shown will be visible on the purification unit.
INDICATION
:
Steady green light – Water faucet closed:
Status
: Unit is ok, and in standby mode
INDICATION:
Green single flash – Water faucet closed or
open
Status
: Unit is ok, but performing a membrane flush
Membrane flushing is started automatically when one of the following conditions is met:
A)
When production volume drops below 40 liters per hour for more than 6 seconds.
B)
When the water faucet has been opened and closed
75
times since the last flush.
C)
When 15 liters of water has been produced.
A system flush will reset both the faucet opening and water produced counter.
If during normal operation, the light on the water faucet will be illuminated in RED, you should
scan the NFC chip and let the App give you the insights. If no phone is near you, the system
status can be read out in a more conventional way using the status light on the purification unit.
Immediate attention is required if an audible signal is given in addition to a red light on the
water faucet.
Blue flushing on the faucet indicates a flush when the system is in standby, blue flash while in
production indicates “Warning” on water quality or quantity. The Indication light will flash yellow.
Please consult the Chapter “Trouble shooting” for the actions to be taken, or consult your local
dealer immediately
