manualshive.com logo in svg

Aqua Products Aquabot Turbo, Operator'S Manual & Troubleshooting Manual

Share
Download
Aqua Products Aquabot Turbo Operator'S Manual & Troubleshooting Manual Download Page 2

2

www.AquaProducts.com/Service

TABLE OF CONTENTS

Operating Features ......................................................................................................................... 3-4
Quick Start Instructions .................................................................................................................. 5

Setting Up Your Cleaner

 ............................................................................................................

6-7

Floating Handle................................................................................................................................ 6
Setting up the Power Supply ......................................................................................................... 7
Cleaner Start Position ..................................................................................................................... 7

Knowing / Using Model Features

 ...........................................................................................

8-10

Setting the Power Supply Timer .................................................................................................... 8-9
Operation of Models with Remote Control (using the Remote Control) ................................... 9
Debris Intake Port Width Selector ................................................................................................. 10
Variable Intake Port Depth Extensions .......................................................................................... 10
NeverStuck™ Rollers ...................................................................................................................... 10
Power Washing Jet System ........................................................................................................... 10

Cleaning Patterns / Directional Guidance Mechanisms

 .................................................

11-13

Diagonal Locked Floating Handle .................................................................................................. 11 & 12
Cable Float or Cable Float + 3 Directional Remote Control ......................................................... 11 & 12
Handle Float + Split Wheel Tube with Directional Guidance Clutch .......................................... 11 & 13

          Magnet

Split Wheel Tube + 4 Directional Remote Control ....................................................................... 11 & 13
Cleaning Patterns ............................................................................................................................ 12-13

Maintaining Your Pool Cleaner

 ...............................................................................................

14-20

Cleaning and Changing the Filter Bag ........................................................................................... 14
Flotation ........................................................................................................................................... 15
Propeller Care .................................................................................................................................. 16
Floating Cable Care ......................................................................................................................... 16
Scrubbing Brushes (Molded, Super, Foam, PVA) Care & Replacement .................................... 16-17
Changing Drive Tracks .................................................................................................................... 18
Changing Drive Belts ...................................................................................................................... 18-19
Cleaner Storage ............................................................................................................................... 20

Preparing Your Cleaner for Shipping

 ....................................................................................

20-21

Troubleshooting Guide (Summary)

 ........................................................................................

22-23

Troubleshooting Guide (In Depth)

 .........................................................................................

24-30

Never operate your cleaner when it is not totally submersed in the pool water!  Doing so will void warranty and 

may cause severe damage to motors and require costly repairs!

Never allow anyone to swim in the pool while the cleaner is in the pool!

WARNING: Using the Floating Cable to lift the cleaner out of the water will cause severe damage to your cleaner and 

may result in costly repair!

WARNING: The Power Supply must be at least 12 feet / 4 meters from the pool’s edge at all times!

WARNING!  A Ground Fault Circuit Interrupter (GFCI) / Residual Current Device (R.C.D), must be installed to 

protect your electric outlet and to prevent and possible electrical shock!

Summary of Contents for Aquabot Turbo

































Reviews:

No comments

Brands by name

Popular brands

Load more brands