Aqua Phase AQ-2000, Operating Manual

Page: 6 / 89

Aqua Phase, A Division Mid-State Stainless Inc
. ●330 W Benson Ave. ●PO Box 228 ●Grantsburg, WI 54840 ●
USA
800-208-9274
●715
-463-
5851●FAX: 715
-463-
5853●
Email: aquaphase@medwashers.com
●WEB:
www.aqua-phase.com
Switch Options/Function
“ STOP ” Button When pressed, will stop all Aqua Phase wash functions
“ START ” Button Must be pressed to start any Aqua Phase wash function
WASH TIME Selector Switch Allows you to select the length of wash:
“
3 MIN ” = Three minute wash cycle
“ 5 MIN ” = Five minute wash cycle
“ 7 MIN ” = Seven minute wash cycle
“ RUN/DRAIN ” Selector Switch “RUN” : Set to “ RUN ” to wash an item.
“ DRAIN ”: Set to “ DRAIN ” to drain the water in the
machine. The water should be drained when you are
done washing for the day or if you relocate the
machine. In order for the “
DRAIN” function to
work, the Wash Mode switch must be set to
“
CLEAN & DISINFECT ” or “ CLEAN ONLY ”.
WASH MODE Selector
Switch
(Optional on AQ-1000
& AQ- 2000 Series)
“ CLEAN & DISINFECT ”: When this mode is selected,
Aqua Phase will perform a complete wash and rinse
for the time specified on the WASH TIME Selector
Switch. It will then automatically apply disinfectant
solution.
“ CLEAN ONLY ”: When this mode is selected, Aqua Phase
will perform a complete wash and rinse cycle for the length
of time specified on the WASH TIME Selector Switch. It
will not apply disinfectant.
“ DISINFECT ONLY ”: When this mode is selected, Aqua
Phase will apply disinfectant solution only. It will
not wash or rinse.
GENERAL IN F ORMATION
CONTROL PANEL SWITCHES &
FUNCTIONS
3