14
1
2
4
3
PRODUCT CARE AND STORAGE
The boat is made of the highest quality materials and complies with ISO 6185 standards. Altering
the construction of the boat will endanger your own safety, safety of the occupants and void the
limited warranty!
There is very little that you have to do to keep your boat in good condition for many years.
• When landing on the shore, carry the boat. Do not tow it on the sand or ground as damage
may occur.
• If you use the tow rings to tow the boat, go slowly to avoid over-towing as damage may occur.
• Clean your boat after a trip to prevent damage from sand, salt water or sun exposure. Most
dirt can be removed with a garden hose, a sponge and mild soap. Make sure the boat is
completely dry before storing. Use as few cleaning agents as possible, do not discharge
waste agents into water, and clean your boat preferably on land.
• Be sure your product is completely dry before storing.
• The products may be stored inflated, but do not place any heavy or sharp objects on it.
Hanging the boat is not recommended.
• Open all air valves including the keel’s and deflate boat completely. Remove all the
accessories from the boat; floor boards, seats and oars.
• Fold the boat from back to front to remove additional air. The boat storage bag is designed to
allow you to get your boat into the bag as easily as possible with minimal folds. Follow the
diagram below for the best folding procedures:
• Storage is best in a dry room. Ensure protection against rodents and other vermin, as they
feed on the fabric of the boat.
• Store the product and accessories in a dry, temperature controlled, between 32 degrees
Fahrenheit (0 degrees Celsius) and 104 degrees Fahrenheit (40 degrees Celsius) storage
location.
