background image

2

STANDARD  EN ISO 6185-2:2001

DESIGN CATEGORY   C

BOAT TYPE    TYPE  V

ORIENTAL RECREATIONAL PRODUCTS (SHANGHAI) CO., LTD

NO. 1699 Da Ye Road, Fengxian, Shanghai, China

WWW.AQUAMARINA.COM        MADE IN CHINA

BOAT MODEL

BT-88850

=

7.5

kw

9.9

HP

=

3

=

1

=

320 kg (705 lbs)

=

0.16 bar (2.32 psi)

S/N

CN-ORP

DATE

N.W

33.5 kg (73.9 lbs)

THANK YOU FOR CHOOSING AQUA MARINA 

DELUXE SPORT BOATS 

Compact and lightweight, these economical inflatable boats are great ship to shore tender crafts 

or a highly portable pleasure boat for the boater on the go. Bring your roll-up boat with you to the 

lake, the beach or wherever! With a set-up time of just minutes, no trailers and no special 

equipment, these boats will allow easy access to some of those places you've only seen from 

the shore. Various floor decks can be chosen at your disposal. Optional FRP console and 

steering wheel remote control system enriches your fun of fishing and boating.

This manual has been compiled to help you achieve long term safe use and pleasure from your 

Aqua Marina® boats.

GENERAL INFORMATION

SAFETY

 

In a manual of this type it is impossible to give adequate space to the topic of water safety. 

Check in your local area for information and/or training as needed. Inform yourself about local 

regulations and dangers related to boating and/or other water activities. It is your responsibility to 

be aware of and comply with all relevant safety regulations. For all water recreation or sport you 

should have a reasonable swimming ability. Just as swimmers have a cardinal rule about not 

swimming alone. It is strongly advised that you should never go boating alone.

PLEASE KEEP THIS MANUAL IN A SECURE PLACE, AND HAND IT OVER TO THE NEW 

OWNER WHEN YOU SELL THE CRAFT. RECORD THE "HULL IDENTIFICATION NUMBER" 

(HIN) WHICH IS LABELLED ON THE BOAT

MANUFACTURER’S CERTIFICATION 

Our boats comply with the ISO 6185 standard 

established by the International Organization 

for Standardization.

MANUFACTURER’S RECOMMENDATION

The total number of persons, motor power 

and total weight shall not exceed the limits 

labeled (Fig. 1) on the boat.

S/N

Fig.1

1

2
3
4
5

6

7

Label format for boat without the console

Summary of Contents for BT-06300AL

















Reviews: