13
OUTBOARD MOTOR INSTALLATION
After the boat is fully inflated and well assembled, attach your outboard motor onto the Engine
Mount at the center of the transom.
NOTE:
• Ensure the motor is always fixed on the transom.
• Read the instruction manual of the outboard motor for correct installation and operation.
WARNING:
Overpowering a boat can result in serious injury, death or boat damage. Find the
maximum motor power marked on the boat label.
OPTIONAL CONSOLE INSTALLATION
Refer to AM removable fiberglass steering console instruction.
NOTE:
The console should be installed before the inflation of keel
OAR ASSEMBLY INSTALLATION
1. Join the two shafts of the oars together with the couplers and securely tighten the couplers
covers. (Fig. 9)
NOTE:
Completely insert the shafts into the Couplers or damage may occur.
2. Attach the oars to the rotation oarlocks and lock them into position. (Fig. 10 & 11)
NOTE:
When the oars are not in use, insert the oars into the Oar Holders to avoid damage and
loss.
Pin
Fig.9
Fig.10
Fig.11
