Aqua Lung i300C, Owner'S Manual

Page: 34 / 67

Doc. 12-7874-r06 (11/27/17)
34
DIVE OPERATION
© Aqua Lung International, Inc. (2017)
TIMER
The Timer function can be used throughout the dive. To add or remove the Timer from the Main display hold the
ADV button for 2 seconds. The Timer will cancel upon surfacing.
NOTE: Keep in mind that while the Timer is on the Main screen, Safety and Deep stops will be found on
the Alt 1 screen only. They will be restored to the Main screen if the diver removes the Timer from the
Main screen by holding the ADV button for 2 seconds. Additionally, Alarms such as Decompression
will take priority over the Timer function and will display in its place during the alarms.
DEEP STOP MAIN
If triggered, the Deep Stop will activate upon ascending to within 3m (10 ft) below the calculated Deep Stop depth.
The stop time will be displayed and count down to 0 min as long as you stay within 3m (10 ft) above or below the
stop. While Deep Stop Main is displayed, you may access the Gas Menu (if gas 2 is set ON) and Alt screens by
pressing the ADV button to cycle through them. They are similar to the No Deco Main/Dive ALT 1, Dive ALT 2, and
Dive ALT 3 displays. See Deep Stop in the Dive Features chapter for further details.
NOTE: The i300C does not penalize for a missed Deep Stop.
remaining
stop time
(min:sec)
stop depth
min:sec to 59:59 (min icon not show-
ing), then min only to 999 (with min icon
showing)
ADV
SEL
start/stop Timer
add/remove Timer from
Dive Main screen