Aqua Lung i300C, Owner'S Manual

Page: 27 / 67

Doc. 12-7874-r06 (11/27/17)
27
DIVE SURFACE MODE
© Aqua Lung International, Inc. (2017)
7. bLUETOOtH (Bluetooth Communication)
Within this screen the Bluetooth® may be turned ON or OFF. When ON is selected, dashes will
display sequentially at the top of the screen indicating that Bluetooth® is initiating. When Blue-
tooth® is turned on it will operate in sniffing mode (searching for compatible devices) while on the
surface and the i300C screen is active. Communication with your i300C must be initiated with your
mobile device using D software.
NOTE : When Bluetooth® is ON the Bluetooth® icon will be displayed when on the surface
with the screen activated. Bluetooth® is temporarily deactivated when the i300C enters
Sleep Mode (screen is turned off) or a dive is started. The i300C returns to "sniffing" mode
when the i300C returns to Surface Mode after a dive or a button is pushed to wake the com-
puter from Sleep Mode on the surface. You will notice the Bluetooth® icon flashing as the
Bluetooth® function is reinitiating.
ADV
SEL
SET BLUETOOTH
save
setting
toggle
setting
ON or OFF
8. LIGHt (BACKLIGHT) DURATION
This setting is the duration the backlight stays on after releasing the buttons. The options are OFF,
5 sec, or 10 sec.
NOTE : The Backlight utilizes an ambient light sensor. If there is sufficient light, the back -
light will not turn on regardless of this setting.
ADV
SEL
SET LIGHT
save
setting
advance
setting
OFF, 5 sec; 10 sec