1.2.2: With a measure tape and spray paint, trace a circle
whose radius measure 12 inches larger than the pool.
See the ANNEX – DIAMETER TABLE to determine the actual
diameter of the pool.
1.2.3: Remove the grass inside the circle with a sod cutter.
1.2.4: Level the site using a shovel, a rake and an optical
level. Remove all high spots and level to the lowest point within
the boundaries. DO NOT ADD ANY SOIL TO THE SITE! Added
soil will not provide the strength required to support the weight
of the pool. The ground must always be firm. The entire bottom
must be smooth and free of stones, sticks and any other foreign
materials that could puncture the liner.
1.2.4-B: IMPORTANT - FROST: In area where the ground
freeze or the drainage is deficient, we recommend to add 2
inches of crushed stone by 18 inches width. This band of
crushed stone has to be leveled and compacted and has to lie
underneath the pool wall.
1.2.5: Retrace the pool circle.
NOTE 1: Do not remove the steel rod at the center of the pool.
NOTE 2:
Aqua Leader
is not responsible for any damages to your pool if it is not installed according
to the installation instructions. Installing your pool on soft or non-leveled ground will void the warranty.
5
