background image

1

   

INSTRUCTION SHEET FOR AQUA LEADER POOLS  

Thank  you  for  choosing  AQUA  LEADER  and  congratulations  on  your  new  pool  purchase!  You  must  make  a 
preliminary  study  of  this  instruction  booklet  to  familiarize  yourself  with  all  that  is  involved  with  the   installation, 
and to get a thorough understanding of the step-by-step procedures you are about to follow. If you do not follow 
this instruction booklet thoroughly, you may damage your pool or property and void your warranty.  
(Refer to your warranty for complete details on conditions and limitations).  
Again, thank you for choosing Aqua Leader, and we wish you many safe and pleasant summers!     

Plan your installation  

Before you begin, make sure your installation meets all municipal regulations and local codes related to above 
ground pool installations. Be sure to check the local laws regarding construction and electrical installations and, 
make sure your pool is installed to conform to all security regulations related to pool fencing and covers.   

Important   

Above ground pools are not designed to be installed below the surface. Outside ground forces can collapse the 
pool wall. If you hire a professional installer, this installation booklet must be followed. AQUA LEADER INC. will 
not be responsible for improper installation.     

Before you begin  

Make sure you have all of the necessary parts and equipment to assemble and install your pool. (See the Parts 
List in your pool specific instruction sheet) If you find irregularities such as missing or defective parts see your 
Aqua Leader authorized dealer for replacements.   

Necessary tools for assembly   

• Measuring tape      

• Felt tip pen  

• Nails       

• Hammer  

• Heavy string      

• Carpenter saw  

• Adjustable spanner     

• Knife  

• Tamping tool      

• 2’ carpenter level  

• Garden rake      

• Screwdriver (philips)  

• Shovel       

• String level  

• Wood stake      

• 2” heavy fabric tape  

• Clothespins 3” long     

• Pliers  

• Optical level      

• Vacuum cleaner (industrial) 

• Sod cutter       

• Carpenter nails 

• Steel rods      

• Pipe wrench  

• Grass roller 

  

3

Summary of Contents for CREATION

























Reviews: