background image

GENERAL INSTRUCTIONS  -  ROUND POOLS

16.

 Rules for safe pool use

NECESSARY SAFETY EQUIPMENT:

A light and strong pole not less than 12 ft (3,66m) long with blunt ends.
A ring type life preserver with a throwing rope attached to it.
Have emergency numbers near the pool and also at the telephone nearest 
to the pool. (Aviable police, fire and rescue unit, available physician, ambu-
lance service and hospital).

WHEN YOU BECOME OWNER OF A POOL, HERE ARE SOME REASONABLE RULES 
YOU SHOULD BE FAMILIAR WITH:

You should not dive or jump from the top rail of the wading not for diving. 
You should never allow your children or neighbour’s children to swim under-
girded.
You should never swim alone.
You should always remove pool ladder, or raise safety ladder when the pool 
is not in use.
If you eat, you should wait at least one hour before you go swimming.
You should not allow any family pet in the pool.
There shouldn’t be any horseplaying or roughhousing around the pool.
You should keep all electrical appliances away from the pool.
You should keep all glass or metal objects away from the pool.
You should not swim when there are risk of lightning : Thunderstorm en-
danger swimmer

Unfortunately, pool owners wait for some accidents before setting guidelines. 
Establish your rules before the first person steps into the pool. If possible, make 
sure that everyone using the pool has some basic training in the water safety 
and basic rescue method. Some associations publish booklets about ‘‘Basic 
rescue and water safety’’ which gives information on assisting a swimmer in 
difficulty, artificial respiration, first aid for swimmers, family water safety and 
several other subjects. We strongly recommend you to get one.

+

+

+

+

+

+

+

+

+

+

+

+

+

15

.  Finish filling the pool

22

Summary of Contents for Contempra Round

























Reviews: