Aqua Leader Contempra Round, General Instructions Manual

Page: 18 / 24

06
SECTION
GENERAL INSTRUCTIONS - ROUND POOLS
ASSEMBLING
THE POOL FRAME
17
The wall joints is hidden behind the upright on most pools. This assures that the
skimmer and the skimmer return holes are not obstructed.
Insert the upright in the bottom joining plate until the hooks snaps.
(image 25)
10.
Install the uprights
IMPORTANT NOTE:
Use the ridges in the pool wall to make sure
the upright column is straight up and down.
IMPORTANT NOTE:
Ensure to leave a gap between the two
bottom rails
9.
Install upright bracket
Lay the uprights on the floor and position and place the top bracket on the top
of the upright. Make sure the bracket is in the correct position. The holes of the
bracket must align with the holes on the top of the front face of the upright. Insert
two screws in the center holes of the bracket to fix it.
Position and place the middle bracket on the center of the upright. The holes of
the bracket must align with the holes of the frontal face of the upright. Insert two
hexagonal screws in the center holes of the bracket to fix it. (image 20)
24
25
4x
IMPORTANT NOTE:
If you have a 15’ or a 18’ feet pool YOU HAVE
TO PLACE THIS SPACER between the upright
and the upright bracket. For other pool sizes
YOU MUST NOT INSTALL THIS PLASTIC SHIM.
TOP
BOTTOM