2 1 |
P a g e
SOLENOID CONNECTION MODULE: Connects a
NORMALLY CLOSED line voltage solenoid valve to
the system. On a non-monitored system, the sole-
noid will only close on a lamp failure error. On a
monitored system, the solenoid is closed when the
UV level drops below 50%. Also note that in cases
where emergency use of untreated water is re-
quired, the controller can be placed into a manual
override mode allowing for the flow of water in an
alarm condition. Order PN 40040006.
4-20 mA MODULE: Outputs a 4-20mA signal of the
UV output to a remote device such as a data logger
or computer. Order PN 40040007.
The WiFi module and accompanying IoT
application allows you to connect your UV
system to a smart phone, tablet, computer
or other connected platform. View system
status, receive SMS or email messages of
alarm conditions and monitor the health of
your UV from anywhere via this connected
platform. Connect the device via the APP
found on Google Play or the APP Store and
connect your UV device to your router, then
download the software for your connected
device and have peace of mind that your UV
system is providing safe, reliable disinfection.
Summary of Contents for GEN4 Series
Page 26: ...2 6 P a g e...
Page 27: ...2 7 P a g e...
