background image

The dead bacteria should be removed from the pool system as needed or the water 
may become cloudy. The dead bacteria are removed by backwashing the sand filter 
approximately once a week or as needed, and a cartridge type filter should be rinsed 
as needed   

Note: the single chlorine tablet should last approximately one week then, when 
reduced to the size of a half dollar, add another single tablet. 

Important: Do not use more than one chlorine tablet at a :me as it may greatly affect the 
PH-level, which may oxidize a copper element in the Aqua-Excellence Pool Sani:zer and 
De-Chlorinator. The system will not work correctly if PH level is below 6.6 or higher than 
8.6. Some older pools may use copper plumbing. In these circumstances, the single 
chlorine tablet should be placed downstream of the copper plumbing and before (or 
upstream) of the filter. 

5. The recircula:ng process con:nues as the water con:nues back through the Aqua-

Excellence Pool Sani:zer and De-Chlorinator where living microorganisms con:nue to 
be killed and chlorine broken down or removed. The swim area of the pool is fresh 
water free of chlorine.  

6. This process will con:nue as long as the system is running. The system should be 

allowed to run con:nuously for 12 hours

. It is recommended to run the system during 

the day3me when swim ac3vity is high then stopped overnight, unless removing 
chlorine shock.                                                                                                                                          

NOTE: It is necessary for the wall and floor surface of the pool be maintained by 
suc:on or pressure type automa:c cleaning units, designed to either immediately pull 
dirt, debris, algae, etc. into the skimmer or cause it to become adrin, where it will 
eventually recirculate through the skimmer. Note:  if necessary, maybe once a month 
or so, chlorine shock may be broadcast across the pool aner large storms or heavy 
swimmer ac:vity or pets, or to kill any algae or mold that may aoach to the wall 
surface. It is recommended to shock in the evening aner swim ac:vity and allow the 
pool to run overnight so the De-Chlorina:ng effect will remove the chlorine shock 
from the pool system. 

7. The Aqua-Excellence Pool Sani:zer and De-Chlorinator also helps maintain the pool’s 

PH level; however, it is recommended for the owner to monitor the PH, keeping it near 
7. 

4

Summary of Contents for AE17



















Reviews: