background image

The Aqua-Excellence Pool Sani:zer and De-Chlorinator Descrip:on   

The AE17 is 8”X 23”, weighs 40.5 pounds and treats pools up to 17,000 gallons.                                             

The unit comes with a tank head bypass assembly and 1” pipe connec:ons and contain metallic media 

blends with granular ac:vated carbon that kill bacteria, algae, viruses, break down calcium, which 

prevents scaling and removes chlorine. 

The AE40 is 8”X 41 3/8”, weighs 73.5 pounds and treats pools 17,000 to 40,000 gallons.                         
The unit comes with a tank head bypass assembly and 1” pipe connec:ons and contain metallic media 
blends with granular ac:vated carbon that kill bacteria, algae, viruses, break down calcium, which 
prevents scaling and removes chlorine. 

Both units have an interior ¾” riser tube (or flow tube); therefore, pool systems with 1 ½” or  
2” pool plumbing will require a bypass of either ¾” or 1 ¼” bypass to maintain the water flow 
for the pool’s pump flow rate (See bypass assembly for further informa:on). Bypasses are 
easily assembled of schedule 40 PVC parts found at your local building supply. As the water 
recirculates, eventually all the pool water is treated.       

How Does It Work? 

The process descrip:on will begin at the pool water filter: 

1. As the water exits the pool water filter it flows downstream through the return line 

toward the pool.  

2. It will then flow through the Aqua-Excellence Pool Sani:zer and De-Chlorinator, 

located between the pool filter and the pool. As the water flows through the Aqua-
Excellence Pool Sani:zer and De-Chlorinator bacteria, algae, and viruses are killed and 
chlorine is removed on contact. The addi:onal flow demand will go through easily 
made bypass plumbing and will eventually circulate through the sani:zer and de-
chlorinator.  

3. The treated water then con:nues to the jets where the water is placed back into the 

pool area, free of chlorine and up to 99.999% bacteria killed.  

4. T

he water is then pulled from the pool area through the skimmer, where it will run 

over one (1) single 2”-3”chlorine tablet that is placed into the skimmer. The purpose of 
the chlorine tablet is to oxygenate the dead bacteria so it will catch in the pool filter.

 

3

Summary of Contents for AE17



















Reviews: