background image

https://aquacreekproducts.com/help-center/troubleshooting/

8/15/2022 12:41:43 PM PAGE - 8  

Aqua Creek Products Annual Pool Lift Safety

INSPECTION REPORT

LIFT / INSPECTION INFORMATION

Test Date:
Pool Lift Model:
Serial Number:
Inspected By:

Find additional trouble shooting info. and videos at: 

For Additional Support Assistance Call:

Toll Free: 888-687-3552

International: 1+406-549-0769

Maintenance Notes:

Please read and fill out 

all

 information carefully

Improper use and/or maintenance of pool lift can lead to actuator and/or other mechanical failures and 

possible personal injury.  Please read and follow the product operators' manual and the instructions 

below.     

NOTE: Completely cycle the lift 

without

 a load 

before each use

 to 

verify the lift is   functioning properly

.

Product service life depends on the load characteristics, type and frequency of use, and the environment in 

which the product is being used.  For example, persons not calmly sitting but falling down with their full body 
weight in the chair, or using the pool lift's chair as a diving platform can cause premature actuator failure 
and/or possible personal injury.
Based on historical product service life analysis, Aqua Creek recommends replacing the actuator(s) and other 

electronic components after 5 years of service. Check component serial numbers and purchase records to 
verify the age of your components.
A functional weight lifting force of a maximum of 100lbs. Must be periodically verified by applying a non-live 

load (without a person) through the entire operating cycle of the lift.  This process is performed in order to 
verify the smooth operation.  Make note of any unusual noises or sudden movements coming from the 
actuator(s) or other components.  Note: In some lifts, a sudden quick movement at the beginning of the 
cycle is normal but should smooth out over the course of operation.
Creating a side load on the actuator by pushing and/or pulling on the actuator, especially under load 

conditions, can cause damage to the actuator and or personal injury.
Electronic components are designed to be plug-and-play type replacements.  There is no need to access the 

internal mechanisms in these components.  The actuator, battery, and all electronic components may only be 
disassembled by authorized factory-trained personnel.  Disassembly of electronic components by improperly 
trained and unauthorized persons will void the warranty on those components.
The operator of the pool lift should never allow the pool lift to hit any stationary object either vertically or 

horizontally while operating a pool lift, i.e. walls, ceiling, pool/spa bench, etc.
For quick and accurate troubleshooting and inspections, we recommend having a voltage meter, Vito Battery 

Check Cable (Item F-VTC002) and an Aqua Creek Test Light (Item F-01TL) on hand as well as adequate test 
and replacement components for the unit.
Remove the pool lift from service immediately if any unusual noise is heard coming from the actuator such as 

grinding, popping or sudden inconsistent movements.
Immediately remove from service any lift that does not have 100% compliance with the inspection until the 

appropriate corrections have been made by a qualified person.

Summary of Contents for F-EZPL2













Reviews: