NOTES/RECOMMENDATIONS:
With all connections connected, operate the lift through a
1.
complete cycle without weight to confirm the lift is functioning
correctly. Note any strange noises and any unusual operation.
Verify the lift was installed correctly; is the lift free to travel in and
2.
out of the pool without hitting anything like a wall, rail, bench,
etc…
Rotate lift at least 90 degrees over the water and back again if
3.
applicable.
A physical test of the lift function is required when doing an annual inspection. NOTE: The lift should
always be run through a completed cycle without a load prior to each use. The annual test should be
ran both empty and with a typical load weight to test the lift's functions. Make comments and/or
recommendations in the notes area below each section.
N/A
FAIL
PASS
INSPECTION ITEM
1. PHYSICAL POOL LIFT TEST
Aqua Creek Products Annual Pool Lift Safety
INSPECTION REPORT
8/15/2022 12:41:43 PM PAGE - 10
