8 REMOVE THE TURN BAR FROM THE SHIPPING BOX.
CONNECT THE TURN BAR TO THE MAST.
NOTE: BE CAREFUL NOT TO OVERTIGHTEN BOLTS. OVER-
TIGHTENING CAN CAUSE DAMAGE AND COMPROMISE THE
SAFETY OF YOUR LIFT.
BB - 1/4"-20X1/2" BUTTON HEAD BOLT
PART NO. INV00345
WL - 1/4" LOCK WASHER
PART NO. INV01182
WF - 1/4" FLAT WASHER
PART NO. INV01170
9 WITH THE LIFT FULLY ASSEMBLED AND ANCHORED, RUN THE LIFT COMPLETELY OUT
AND BACK IN 3 TO 5 TIMES, WITHOUT WEIGHT, FOR THE LIFTS "BREAK IN" CYCLE PERIOD.
CONGRATULATIONS, YOUR LIFT IS NOW READY FOR USE!
MOVE HANDLE
UP AND DOWN
TO RAISE LIFT
PUSH HAND UP AND
HOLD TO LOWER LIFT
DO NOT PUSH OR PULL AGAINST
THE HYDRAULIC RAM - IT WILL CAUSE
DAMAGE TO THE LIFT
46.69cm
R18 3
8 "
139.71cm
R55"
360 MANUAL
ROTATION
8/15/2022 12:41:43 PM PAGE - 7
EZ2
CATALOG NO. F-EZPL2
LIFT FUNCTION
