FARBWERK
Select “Outputs” from the device list below the “aquaero” entry. From the
“aquabus: farbwerk x, output y” section, select the appropriate farbwerk to receive
sensor data. Select the “Transmit sensor data to farbwerk” mode and the data
source to be transmitted. The assignment to the four software sensors of the farbw-
erk is predetermined.
10.
10.
10.
10. RGB controller configuration
RGB controller configuration
RGB controller configuration
RGB controller configuration
Select “RGB” from the device list below the “farbwerk” entry to configure
the four LED outputs. In the upper section, the four outputs can be dis-
abled entirely. For disabled outputs, all further configuration options are
removed from the lower section.
10.1.
10.1.
10.1.
10.1. Output mode
Output mode
Output mode
Output mode
Each RGB output can be controlled by a temperature sensor input or software
temperature sensor, by an external controller (for instance from an aquaero 5/6
connected via aquabus, via Bluetooth connection or third party software), set to a
fixed color or a color gradient. A copy function can be used to transfer all settings
from another previously configured controller.
10.2.
10.2.
10.2.
10.2. LED type
LED type
LED type
LED type
The color sequence of the electrical contacts of LED strips may vary. Select the cor-
rect type corresponding to markings on the LED strip.
10.3.
10.3.
10.3.
10.3. Color settings
Color settings
Color settings
Color settings
Depending on the current controller mode, one or two colors can be defined. Col-
ors can conveniently be set using the graphical color and brightness selectors, al-
ternatively corresponding values can be set manually. The “Optimized colors for
Aqua Computer LED strip” function enables color optimization for the LED strips
available from Aqua Computer.
10.4.
10.4.
10.4.
10.4. Temperature controlled mode
Temperature controlled mode
Temperature controlled mode
Temperature controlled mode
In temperature controlled mode, two colors can be defined corresponding to two
temperature readings. The farbwerk controller generates a color gradient for tem-
perature sensor values between these limits. The “Controller source low pass filter”
setting influences sensor reading smoothing for a steady color gradient.
10.5.
10.5.
10.5.
10.5. Refresh speed
Refresh speed
Refresh speed
Refresh speed
The “Refresh speed” setting determines how often the controller is updated.
© 2014-2020
Aqua Computer GmbH & Co. KG
- 15 -
Gelliehäuser Str. 1, 37130 Gleichen
computer
aqua
