FARBWERK
ting down or if an involved program is closed. If no data is available or the data
has not been updated within the time interval defined as “Timeout in s”, the device
will use the “Fallback temperature” instead. As soon as data is available again,
normal operation of the software sensor will resume automatically.
Transmission of sensor data via USB interface
During installation of the aquasuite, the background service “Aqua Computer Ser-
vice” is also installed. This service supplies various data from PC components and
imported data from aquasuite web, additionally sensor data provided by third par-
ty software can be accessed. In order to access third party software data, the third
party software has to be correctly installed, configured and running.
Currently, the “Aqua Computer Service” supports data transfer from “HWiNFO”
(REALiX, Freeware, www.hwinfo.com) and “AIDA64” (FinalWire Ltd., subject to li-
cense fees, www.aida64.com).
HWiNFO automatically exports all sensor values, the “Sensor Status” Window has
to be open.
In the AIDA64 preferences menu, writing to WMI must be activated in the “external
applications” sub-menu:
By clicking the plus symbol labeled “Data source”, one of the provided sensors
can be assigned to the selected software sensor.
Transmission of sensor data via aquabus interface
Sensor data to be transmitted via aquabus is determined solely by the connected
aquaero 5/6 controller. For configuration, the aquaero has to be connected to the
PC (at least temporarily) via USB.
- 14 -
Aqua Computer GmbH & Co. KG
© 2014-2020
Gelliehäuser Str. 1, 37130 Gleichen
computer
aqua
