Fume Arms
15
FUME ARM
SUPPORT BRACKET
9.1 MAXAIR typical installations.
Other installations are possible. Contact AQC or your representative for details.
MAXAIR (hanging model, wall or post)
with bracket only.
MAXAIR (portable or table/bench
mount) with bracket.
Note on bench mount models :
Do not force arm down at socket past the maximum bend. This
may cause damages in the spring and cable assembly in socket.
9.1.1 Mounting
The capture arm can be mounted on a wall. Ensure the wall is level, and use the holes of the
mounting bracket to mark the holes.
Use locking fixing bolts and nuts suitable for the wall material and if the wall is not solid, a plate
should be installed on the opposite side to sandwich the wall and provide a solid support.
SUPPORT BRACKET
FUME ARM
53" MIN.
