Fume Arms
14
COMPANION
DUCT FLANGE
Note on arms equipped with recoil telescopic springs :
Do not attach spring assembly from socket
tube spring bracket to rotating socket before step # 4 is completed.
1.
Install bracket on support structure according to arm length. Fasteners to support structure
are not supplied. Arm bracket can also be welded to structure if allowed or permitted.
2.
The MAXIDRIVE exhaust fan should be facing right, left or front. Refer to building owner
or engineer for direction of exhaust air. Place fan onto arm support bracket. Align fan inlet
flange bolt holes to bolt pattern on arm bracket. Secure fan temporarily to support bracket
using C clamps.
Proceed with steps 3 to 7 in arm hanging type installation procedures.
3.
Connect exhaust ductwork (and silencer if supplied) to fan outlet.
9 OPTIONAL EQUIPMENT
The MAXAIR fume arm is offered with options as follows:
1.
Direct mount exhaust fan
2.
LED 24V light kit with switch
3.
24V hood mounted fan switch
4 .
24 V transformer for light or fan switch
5.
Oversized hoods (shipped unassembled to fume arm)
6.
Hood screen mesh
7.
304 or 316 stainless steel tubes and hoods
8.
Aluminum arm tubes
9.
PVC tubes (not available in all diameters)
