PRODUCT MANUAL
BAT/44892
www.aqtron.com - [email protected]
®
11. Even though the portable power source is equipped with polarity warning, prevent clamps from
touching each other or contact the same metal to prevent accidental arcing.
12. Use of an attachment not recommended or sold by the manufacturer, may result in a risk of damage to
the unit, or personal injury.
13. When using the wall charger or power extension cord, pull on the plug and NEVER ON THE CORD when
disconnecting.
14. Replace damaged wall charger or power extension cord immediately. Do not attempt to recharge the
portable power source with damaged cords.
15. The portable power source is designed for use under any weather condition.
16. Prevent submersion in water.
17. Do not operate with flammables in the vicinity such as gasoline etc.
18. If the portable power source is damaged in any way, discontinue use. If the portable power source is
leaking battery acid do not scrap it. Take it to the closest battery recycler in your area.
19. The portable power source should never be left in a total discharged state for any period of time.
Damage to the battery could be permanent When not in use, leave the portable power source connect
ed to the wall charger or recharge every six(6) months.
OPERATIONAL AND SAFETY DESIGN FEATURES.
1. The portable power source provides more than enough starting power for most vehicles. May also be
used in deep cycle applications.
2. The portable power source will power most 12 Vdc equipment with a male cigarette dc plug.
3. The portable power source comes equipped with dc automatic overload protection.
4. The portable power source contains a 12 volt sealed battery. It is recommended to be stored in up posi-
tion.
5. The portable power source contains reverse polarity warning which will remind of incorrect setting be
fore power ON.
6. Safety storage compartment provide convenient storage of cables when not in use.
Important Note
Unauthorized modifications to the portable power source, not expressly approved by the party responsible
for radio, frequency emission levels from the portable power source, may cause an increased amount of radio
frequency energy to be emitted. Such a modification could void the customer’s authority to use the portable
power source.
SAFETY FEATURES
1. Safety storage compartments prevent accidental sparking of clamps.
2. The portable power source contains the latest technology with its 12 volt sealed non-spillable battery.
The portable power source may be stored in any position.
3. The portable power source is recommended to be stored in up position.
FIRST TIME CHARGING PROCEDURES
When first purchased the portable power source should be charged for a minimum of 30 hours, unless all the
power level lights and the charged light come on when the test button is pressed.
The power source can only be charged at 12V.
19. The portable power source should never be left in a total discharged state for any period of time. Damage
to the battery could be permanent When not in use, leave the portable power source connected to the
wall charger or recharge every six(6) months.
OPERATIONAL AND SAFETY DESIGN FEATURES.
1. The portable power source provides more than enough starting power for most vehicles. May also be used in
deep cycle applications.
2. The portable power source will power most 12 Vdc equipment with a male cigarette dc plug.
3. The portable power source comes equipped with dc automatic overload protection.
4. The portable power source contains a 12 volt sealed battery. It is recommended to be stored in up position.
5. The portable power source contains reverse polarity warning which will remind of incorrect setting before power
ON.
6. Safety storage compartment provide convenient storage of cables when not in use.
Important Note
Unauthorized modifications to the portable power source, not expressly approved by the party responsible for radio
frequency emission levels from the portable power source, may cause an increased amount of radio frequency
energy to be emitted. Such a modification could void the customer’s authority to use the portable power source.
SAFETY FEATURES
1. Safety storage compartments prevent accidental sparking of clamps.
2. The portable power source contains the latest technology with its 12 volt sealed non-spillable battery. The
portable power source may be stored in any position.
3. The portable power source is recommended to be stored in up position.
FIRST TIME CHARGING PROCEDURES
When first purchased the portable power source should be charged for a minimum of 30 hours, unless all the power
level lights and the charged light come on when the test button is pressed.
The power source can only be charged at 12V
.
Figure 1. Test Button, Charging and Charged LED’S
RECHARGING THE PORTABLE POWER SOURCE
There are two ways to charge the portable power source. The first method is automatic charging with the provided
switching charger (preferred). The second is with the DC power jack through the power extension cord. The second
way is not automatic and requires monitoring or the portable power source could be damaged due to overcharging.
1. With the switching charger. The portable power source is charged by switching charger with cigarette lighter jack,
(may be found on the front of your portable power source). Recharging takes approximately 4 to 6 hours for each
light that does not come on when the test button is pressed. The portable power source CAN be left connected to
the switching charger indefinitely.
a. Connect the charger to the AC outlet.
b. Insert the charger male cigarette jack into the charging jack.
c.
Turn the safety switch to “ON” or “12V” position.
d. Allow the portable power source to charge until the charged light comes on.
e. Once the charged light comes on, you can either disconnect the charger or charge another three to six
hours, (three hours is acceptable but to ensure maximum output capability, six hours is preferred).
Note: Above charging hour is for reference. Charge condition will change per charger design.
2. With the Optional DC/DC Extension Cord.
a. Start the vehicle engine.
b. Plug one end of the power extension cord into the portable power source dc receptacle and the other end
into a vehicle lighter outlet and turn power switch to “ON” or “12V” position.
c.
Press the test button to check volt meter. If meter indicates above 13V when power switch is in “ON” or
“12V” position, disconnect DC plug and turn off the power switch on your booster.
Modle:HS120S
Modle:HS340S/HO324S
