43
Procedure
This is how to empty the seed tank:
Step
Description
Explanation
1
Loosen the star knob screws (2) on the
seeding shaft covers (1) and remove
the seeding shaft cover.
2
Loosen the star knob screw (3) on the
calibration slide (4).
Pull the calibration slide to the front, lift
the rear part and push it up towards the
seeding shaft.
Retighten the star knob screws (3) on
the calibration slide (4).
3
Start the emptying program of the
control box, refer to the control box
operating manual for more information.
7.3
Cleaning the seed drill
Purpose
The seed drill must be cleaned inside and out on a regular basis to ensure long-term
proper functioning. If not cleaned properly, germs can form inside the seed drill due to
seed residues.
Requirements
The following requirements must be fulfilled for this work step:
•
The implement is disconnected from the power source, see
Disconnecting the
seed drill from the power source
On page 41.
Required components, tools and materials
For this work step, the following components, tools and materials are required:
•
Air compressor
•
Moist cloth
Summary of Contents for PS 300 M1 D
Page 48: ...48 10 2 Connection diagram...
Page 59: ...59 Notes...
