34
Step
Description
Explanation
4
Loosen the knurled nuts (5).
5
Remove the bearing flange (4).
Result:
6
Screw the bearing flange turned by 180°
onto the seeding shaft and pull out the
seeding shaft.
NOTE: Residual seed can fall out in the
process.
7
Insert the new seeding shaft.
8
Turn the seeding shaft until the fitted key
of the gearbox motor engages in the
groove of the seeding shaft.
9
Slide the bearing flange onto the
seeding shaft.
10
Tighten the knurled nuts on the bearing
flange by hand.
11
Fit the bearing cover on the two
threaded rods and tighten the cover nuts
with the hexagon key.
12
Check the seeding shaft for ease of
motion, see
Checking the ease of
motion of the shaft
On page 35 for
more information.
Summary of Contents for PS 300 M1 D
Page 48: ...48 10 2 Connection diagram...
Page 59: ...59 Notes...