SIDE ENTRY 2P TRUNNION BALL VALVES API6D STANDARD - FS9000 SERIES
Australian Pipeline Valve - Installation, Operation and Maintenance Manual
3
I N T R O D U C T I O N
The majority of this information is common knowledge to experienced steel valve users. When properly
installed in applications for which they were designed, APV valves will give long trouble free service. This
instruction is only a guide for installation, operation and minor maintenance. A professional APV approved
valve engineering facility should be utilised for reconditioning and minor repairs.
Note
We do recommend that this entire document be read prior to proceeding with any
installation or repair. Australian Pipeline Valve and it’s parent company take no
responsibility for damage or injury to people, property or equipment. It is the sole
responsibility of the user to ensure only specially trained valve repair experts
perform repairs under the supervision of a qualified supervisor.
RESPONSIBILITY FOR VALVE APPLICATION
The User is responsible for ordering the correct valves. APV Valves are to be installed in the observance of
the pressure rating and design temperature. Prior to installation, the valves and nameplates should be
checked for proper identification to be sure the valve is of the proper type, material and is of a suitable
pressure class and temperature limit to satisfy the applications requirements.
Do not use any valve in applications where either the pressure or temperature is
higher than the allowable working values. Also valves should not be used in service
media if not compatible with the valve material of construction, as this will cause
chemical attacks.
RECEIVING INSPECTION AND HANDLING
Valves should be inspected upon receipt to determine:
- Compliance to purchase order requirements.
- Correct type, pressure class, size, body and trim materials and end connections (this information may
be found on the nameplate or may be stamped on the body of the valve).
- Any damaged caused during shipping and handling to end connections, hand wheel or stem.
The End User is advised that misapplication of the valve may result in injuries or
property damage. A selection consistent with the particular performance
requirements is important for proper application and is the sole responsibility of the
end user.
