10
Quality for Professionals
3.2 Assistance in the event of problems
Problems:
Possible remedy:
No display after pressing
the on/off button.
•
Check whether the power cable is properly inserted
into the control box and is also connected to the
correct terminals on the battery.
•
CAUTION: Faulty connection or removal of the
flying fuse on the positive terminal of the power
cable can result in damage to the control box!
Hydraulic fan is running,
E03 is still lit.
•
Is there no pressure switch installed? Programming,
see point 7.
4
Cleaning
Use a dry cloth to clean the control box.
Do not use any aggressive solvent! This may damage the implement.
5
Decommissioning, storage and disposal
5.1 Decommissioning the implement
Switch off the control box using the on/off button. Disconnect the control box from the
power supply after use.
5.2 Storage
The control box must be stored in a dry location protected from weather conditions.
5.3 Disposal
Disposal of the implement must be performed according to the local disposal
regulations for machines.
