Every 100 hours of operation
Maintenance routines:
♦
Change the engine oil. See the engine manual for
more information.
♦
Check and clean the spark plug. See the engine
manual for more information.
♦
Check the shock absorbers.
♦
Check the air filter.
♦
Check the engine speed. See the engine manual
for more information.
♦
Check the V-belt. Applies to belt-driven machines.
♦
Clean the carburettor's fuel cock. See the engine
manual for more information.
♦
Clean the silencer spark catcher. See the engine
manual for more information.
CAUTION Cover the V-belt
Running a machine without the protective cover over
the V-belt may cause trapping or machine damage,
which can cause injury.
►
Never run the machine without the protective cover
over the V-belt.
►
Stop the engine before removing the protective
cover.
Checking the V-belt
The V-belt must be checked and adjusted by
authorized service personnel.
1. Remove the protective cover (A).
2. Check if the V-belt (B) is damaged, change if
necessary.
C
A
B
3. If the V-belt tension needs adjusting, release the
belt tensioner (C) and push it backwards.
4. Tighten the screw on the tensioner (C) and
reinstall the protective cover (A).
© 2014 Construction Tools EOOD | No. 9800 1624 01 | 2014-06-19
Original instructions
22
RP 160
Safety and operating instructions