♦
Clean and replace the air filter (B) if necessary.
B
Checking the controls
1. Check that the throttle control (A) is not damaged
and does not jam.
A
2. Lubricate the controls (A, B) if necessary.
B
Checking the safety straps
♦
Check the safety straps on the front and back of
the machine. Replace if they are damaged.
♦
Check the screws and nuts on the safety straps,
if necessary tighten or replace.
Cleaning the machine
♦
Do not spray water directly onto electrical
components or the instrument panel.
♦
Place a plastic bag over the fuel filler cap and
secure with a rubber band. (This will prevent water
from entering the venting hole in the filler cap.
Otherwise this could cause operational
disturbances, such as clogged filters.)
NOTICE
Never aim a water jet directly at the fuel
filler cap. This is particularly important when using a
high-pressure cleaner.
After the first 20 hours of
operation
Maintenance routines:
♦
Change the engine oil. See the engine manual for
more information.
♦
Clean and refit air filter.
♦
Check the engine speed.
♦
Check and adjust valve clearances. See the
engine manual for more information.
© 2014 Construction Tools EOOD | No. 9800 1624 01 | 2014-06-19
Original instructions
20
RP 160
Safety and operating instructions