♦
Place lashing straps (A) in a U-shape around the
bottom plate and secure both front and rear.
♦
Lock the handle (B).
A
B
Installation
Fuel
Filling
WARNING Fuel hazard
The fuel is extremely flammable and fuel fumes can
explode when ignited, causing serious injury or death.
►
Protect your skin from contact with the fuel.
►
Never remove the filler cap or fill the fuel tank
when the machine is hot.
►
Never smoke when filling the fuel tank or when
working with the machine or servicing it.
►
Avoid spilling fuel and wipe off any fuel spilled on
the machine.
Filling procedure
1. Stop the engine and let it cool down before filling
the tank.
2. Release the filler cap slowly to let any pressure
escape.
3. Fill the fuel tank to the lower edge of the filler
pipe.
4. Never overfill the tank. Due to the movement of
the fuel within the tank, it is possible to have fuel
at a higher level than the tank cap, which can
lead to a spillage of fuel if the tank cap is opened.
This can be avoided by only opening the tank
cap when the machine is tilted and the tank cap
is at the fuel tank's highest point.
Operation
WARNING Engine running hazard
Vibrations from the engine can cause material
changes, this can cause the machine to move and
cause injuries.
►
Never leave the machine with the engine running.
►
Ensure that only authorized personnel operate the
machine.
NOTICE
When operating the machine, follow the
instructions in the manual; never sit or stand on the
machine when it is working.
Operating near edges
WARNING Overturning hazard
When operating along edges, at least
2
⁄
3
of the
machine must be on a surface with full bearing
strength, otherwise the machine can tip over.
►
Switch off the machine and lift it back on surface
with full bearing strength.
© 2014 Construction Tools EOOD | No. 9800 1624 01 | 2014-06-19
Original instructions
14
RP 160
Safety and operating instructions