
10
Factory settings
The LSE-D16-24-AB is delivered with the following settings:
- Level 1: All inputs of group 1
= Closing contact NO
- Level 2: All inputs of group 2
= Closing contact NO
- Level 3: All virtual DIP-Switches
= off
- Level 4: Common output priority 2
= not active
- Level 5: LED-Colour for all inputs of group 1
= red
- Level 6: LED-Colour for all inputs of group 2
= green
Reset to factory settings
The factory settings can be restored by pressing the three buttons HQ+LQ+LT
simultaneously for at least 10 seconds. All previous settings are lost; resetting
to the factory settings cannot be undone.
10.21
APS systems AG
Neumatt 4
CH-4626 Niederbuchsiten
Tel. +41 (0)62 517 88 33
Switzerland
E-Mail: [email protected]
www.aps-systems.ch