APS LSC, Installation & User Manual

Page: 14 / 16

14
LSC
Panel Module PM
Application & Characteristics
The Panel Module PM acts as an external display in cabinet fronts. It is driven by the BM to
which it is connected. The maximum distance between PM and BM is 3 meters.
o
8 operation indicator
o
Integrated buzzer
o
RS 232 interface
o
Integrated buttons: Lamp test, Horn acknowledgement and Lamp acknowledgement
o
LED showing the status of the supply voltage
o
Three LED showing the status of the horn-, group- and common relay
Function
The PM has a red LED for each signal input of the BM. Furthermore, it has green LED for the
system outputs. The LED are illuminated when a signal input or a system output is active.
Horn acknowledgement
The integrated buzzer and the relay contact for the
horn are switched off
Lamp acknowledgement
LED goes out or changes to continuous light if the
input is still activated.
Lamp test All LED are activated for five seconds.
Technical data
Housing 96x96x51mm
Mounting position Any
Front panel cut-out 91x91mm
Ambien temperaure 0°C bis + 55°C
Protection degree IP40
Supply voltage Supplied through BM
Flashing frequency 1Hz
Weight 170g