APRILIA SHIVER 900, Service Station Manual

Page: 364 / 444

•
the ABS warning light flashes.
Once the vehicle speed exceeds 5 km/h (3.1 mph):
- if errors are not detected: the ABS warning light turns off
- if at least one malfunction is detected: the ABS warning light turns on permanently.
The ABS system is deactivated!
However, the system is perfectly operative as any other braking system without ABS.
The detection of malfunctions may require more or less time according to the type of failure.
Error detection logic foresees that for the errors to be diagnosed one or more conditions must persist
within a given time.
If during this given time one of the conditions is missing but then it comes back, the timer is reset and
the system is no longer able to diagnose the error.
The ABS system continues to be inactive.
Use of diagnostics instrument for ABS system
Abs screen pages
ECU INFO screen page
This screen shows general data regarding the con-
trol unit, for example software type, mapping, con-
trol unit programming date
CONTROL UNIT DATA
P.A.D.S. characteristic. Value/example Units of
measure
ment
Notes
Frame number - - -
SW version - - -
Vehicle code - - -
Vehicle manuf. or encoding - - -
Vehicle ID from PIN 2 and 15 - - -
Braking system
SHIVER 900
BRAK SYS - 364